SCANMIN KUTSCAN ANALYSER

 

Several minerals and ores have natural radiation as the result of low levels of Potassium, Uranium and Thorium. The ScanMin KUTScan analyser incorporates the latest in digital technology to measure the natural gamma ray radiation of these elements. Physical reactions of gamma rays are captured by a large scintillation detector located directly below a moving conveyor.

The target element is calculated by correlation to direct measurements of the natural radioactive signatures of Potassium, Uranium and Thorium. The technology is suitable for un-beneficiated Run of Mine applications where correlations between K, U & T and analytes of interests are stable. A moisture analyser can be added as an optional extra.

The ScanMin KUTScan analyser can measure the bulk material on a conveyor belt

It is a rugged design that can operate in most industrial environments. The analyser has a wide range of applications.

Results can assist operators with:

 

  • ore grade control
  • bypass control
  • contamination monitoring (e.g. Potassium concentration to smelters) Real time elemental analysis enables active process
Possible applications

Coal mineral matter (Ash)

  • Determination of quality by reporting CV and Ash content
  • Moisture as an optional extra

Mineral applications

  • Direct measurement of K, U and Th
  • Other minerals determined by direct correlation to above
Key features 

  • No isotope required – no RPO administration
  • Latest digital MCA and detector technology
  • Variable mass flow compensation
  • Rugged design
  • Few moving parts • Low maintenance – No Wear parts or consumables
  • No Radiation –Safe for personnel
  • Easy to install
SPECIFICATIONS

Conveyor Width: Up to 2100mm
Bed Depth: Typical 100mm up to 350mm
Material Size: Up to 300mm
Weight: 2200kg (approximate)
Electrical: 110VAC – 240VAC (400VA)
Inputs: Belt speed and mass
Outputs: EthernetIP, Modbus, Profibus, OPC etc. Analysis results and status data are transmitted to the plant via data communication protocol or interface. The system is compatible with most standard industrial systems.
Enclosure: IP65. Zone21/22 also available