SCANMIN COALAB ANALYSER
System description
Rapid Bulk Sample analyser
The Rapid Bulk Sample analyser comes complete with:
• Am241Be
• Special high-resolution detectors
• Rapid consistent feed
• Failsafe interlock systems
• Bulk samples can be sent for further laboratory analysis for verification
Electronics control cabinet
• Processor / PLC
• Power supplies
• Electrical terminations
• Analyser components
• Display panel and terminal
Mass measurement
• The analyser has a scale and reports mass
• The volume of the sample will also be known
• A bulk density can be derived
• Minimum sample size is 200 litres
Technical specifications
Operational
Typically, up to 300mm (material dependent)” _builder_version=”4.9.3″ _module_preset=”default”][/difl_datatableitem][difl_datatableitem row=”Moisture range
0 to 80%” _builder_version=”4.9.3″ _module_preset=”default”][/difl_datatableitem][difl_datatableitem row=”Measurement update time
Typically, 1 – 5 minutes (material dependent)” _builder_version=”4.9.3″ _module_preset=”default”][/difl_datatableitem][difl_datatableitem row=”Instrument precision
Typically, 0.3% at 1 standard deviation (ultimate precision achievable 0.1%)” _builder_version=”4.9.3″ _module_preset=”default”][/difl_datatableitem][/difl_datatable]
Electrical requirements
At the electronics control cabinet 240 volt or 110V single phase, 16 Amp supply.
Operation
The analyser is designed to take samples anywhere from 300kg to 500kg. Measurement time per sample can be as short as 5 minutes. Our proprietary application combined with our latest, state of the art detectors will supply an accurate elemental analysis of the sample within minutes.
The analyser can work in a range of minerals including Coal, Iron ore, Cement, Copper and many more. The analyser will be able to supply a complete assay without the necessity of sample preparation.
Results reporting
Results can be placed directly into the client’s SCADA without any manipulation of the result. The system is designed with a failsafe mechanism with automated sample loading capability. The analyser has been designed to be safe and will conform to all international radiation standards and requirements.